Garage Door

Basics about Your Garage Door Springs

The springs on an automatic garage door are important parts as they are responsible to lift or lower the garage door by counterbalancing its weight. Every time when you open or close the garage door, the torsion springs perform their responsibility and supported other components of the garage door.

They can raise and lower your garage door by maintaining its overall balance. You may be thinking that the automatic garage door is controlled and operated by an opener. The fact is that the garage door opener cannot do this itself; these are the springs that do the actual lifting. If you want reliable garage door services, then call a reputed garage door company such as, Hartford, CT garage door spring repair service to make your garage door functional forever.

Weight of garage door:

To understand the fact that how important the springs are, let’s evaluate the weight of the garage door. Definitely garage door weight aviaries depending on the material used, operating system, size, and insulation capacity. A standard small garage door may weigh from 100 to 150 pounds, medium-range starts from 200 to 300 weights, while the large commercial garage door can weigh more than 400 pounds. Garage door springs need to be strong, sturdy, and enduring to support the huge weight of the garage door.

However, with the passage of time, due to continuous usage and general wear, garage door springs eventually break which need to be replaced immediately. Whenever you need to buy garage door parts especially the springs, it is best to choose a high-quality item, even though they may be a little costly than the average product. It is a wise thing to do to ensure the functionality and security of the garage door because this way you will actually save a lot of money in the long run. If you use low-quality springs in the replacement project, they are likely to break down faster and you will be forced to buy a new item and hire a contractor again.

Garage door extension and torsion springs:

 

Modern garage doors are installed with two types of springs, one is torsion springs and the other is extension springs. There are different models of springs depending on the type of garage door like, commercial or residential garage doors.

Garage door torsion springs are located above the garage door. They hold extreme pressure to generate and release the energy to operate the garage door. Due to extreme tension on the springs, they are likely to break first. These are normally oil tempered devices and made for galvanized steel. The tension of springs is determined through the size of wire, length of springs, and its overall internal diameter in the manufacturing of springs. Torsion springs are placed above the garage door right in the middle while the extension springs are mounted on the sides above the tracks of the garage door.

The life cycle of garage door springs: Both types of springs have a specific life span described by the manufacturer based on the material of the garage door. On average, springs have an expected life span of 10,000 operating cycles. It means that you will be able to open and close the garage door approximately 10,000 times before they break. By learning the basics about garage door springs, you will find it easier to maintain the garage door to keep it in good working condition.